COBRA + CORVETTE =
COBRETTE©
(KIT CAR PRICE LIST effective until 2/28/04) !!
Click here to SEE PICTURES !!
COBRA ON A VETTE ? - An alternative to the Ford powered Cobra inspired kits sold today .
PHASE 1 $2695.0 BODY ONLY .
 | Hand laid Fiberglass body bonded to floor |
| Hood with your choice of factory scoop or Big Block Chevy style and inner panel. |
| Left and right doors skins and inner panels |
| Trunk lid and inner panel |
| Inner cowl |
| Two interior kick panels |
| Two Seat shells (biggest seat available in the industry) |
| Four over rider bumpers & backing plates |
| Interior divider panel |
| Rear trunk divider panel |
| Two form fitting front fender-wells |
| Gap cap insert panel. |
| Dash with built in impressions for tilted gauges. |
| Two piece center console. |
| Impressions are in the body where to cut out for Bumpers , side vent and gas cap installation. |
*** NOTE - NO METAL HARDWARE IS INCLUDED in Phase 1 ***
(Phase 1 pictured below)
PHASE 2 $6,250.00!!! BODY/FLOOR BOLT ON This kit is designed for an individual with mechanical aptitude or access to those in the Corvette profession to simplify the conversion. The concept is simple: Remove (UNBOLT) all front and rear original Vette (68-82) frame to bumper extensions. Unbolt Eight (8) Original Body bolts and remove the complete Vette body (Note: The floor ,hood, doors, front & rear clip all can be removed as one unit. Simply replace the Cobrette Body and Floor in the same position and re-bolt the same eight (8) blots. Remember, our floor is a mold styled after an original Vette which bolts in exactly the same position from (68-82). The main difference is the rear compartment which we eliminate in our floor mold for additional storage space. Included all components in phase 1 and :
| Hand laid Fiberglass Body bonded to the (Vette) style floor. |
| Hood with your choice of factory scoop or Big Block Chevy style and inner panel. |
| Left and right doors skins and inner panels bonded, hinged and aligned. |
| Trunk lid and inner panel bonded, hinged and aligned. |
| Inner cowl |
| Two interior kick panels |
| Two Seat shells (biggest seat available in the industry) |
| Four over rider bumpers & backing plates |
| Interior divider panel bonded . |
| Rear trunk divider panel bonded. |
| Two form fitting front fender-wells |
| Dash with built in impressions for tilted gauges. |
| Two piece center console. |
| All inner panels bonded |
| Hood is pre-fitted bonded, hinged and aligned |
| Headlights with Chrome trim rings installed. |
| Tail lights installed. |
| Factory style aluminum La Mans flip -top gas cap installed. |
| Chrome plated license plate lamp installed. |
| Aluminum side louvers |
| Chrome plated trunk handle installed. |
| Two Chrome plated hood handles installed. |
| Two front turn indicator lamps installed . |
| Chrome framed factory 427 Windshield with glass installed. |
| Chrome plated center rear view mirror installed. |
| Computerized Mandrel bent front steel hoop. |
| Computerized Mandrel bent under dash steel hoops bolted thru four of the floor to frame body mounts. |
(Phase 2 kits in production pictured below)
PHASE 3 $9250.00!!! BODY/FLOOR PAINT READY Includes all the components in phase 2, Plus
| Hood is pre-fitted , hinged and aligned. |
| Doors are pre-fitted hinged and aligned. |
| Trunk is pre-fitted hinged and aligned. |
| Headlights |
| Tail lights |
| Factory style aluminum La Mans flip -top gas cap |
| Chrome plated license plate lamp |
| Aluminum side louvers |
| Chrome plated trunk handle. |
| Two Chrome plated hood handles. |
| Two front turn indicator lamps. |
| Chrome plated center rear view mirror |
| Chrome framed factory 427 Windshield with glass. |
| Body comes hand block sanded urethane primed ,block sanded and re-primed ready for a professional shop finish to be applied. |
(Phase 3 pictured below)
Phase 4 $13,500.00 ! BODY PAINTED - Includes all components in Phase 2 & 3
(Also included although not pictured)
 | Headlights |
|
| Tail lights |
|
| Factory style aluminum La Mans flip -top gas cap |
|
| Chrome plated license plate lamp |
|
| Aluminum side louvers |
|
| Chrome plated trunk handle. |
|
| Two Chrome plated hood handles. |
|
| Two front turn indicator lamps. |
|
| Chrome plated center rear view mirror. |
|
| Chrome framed factory 427 Windshield with glass. |
|
| This kit has a Urethane finish with stripes to fit your selected and unique color choices. |
|
| (NO FRAME / OR ROLLING CHASSIS IS INCLUDED - BODY ONLY ) |
(Phase 4 pictured below)
What if I do not have the time to restore a frame ?
Restored rolling 75 - 82 Vette frame $10,500.00!! Features:
| Straight original hard to find rust - free Vette frame. |
| Sand blasted to bare metal. |
| Powder Coated black at 400 degrees - more chip resistant than automotive paint. |
| New or rebuilt brake calipers. |
| New Brake pads . |
| New brake rotors. |
| New or rebuilt trailing arms with new bearings etc. |
| New or rebuilt Front Upper and lower A-Arms with new bearings, bushings etc. |
| Rear leaf spring new or rebuilt etc. |
| All other related parts and labor to remove and reassemble back to factory specifications. |
| 1968 - 74 frames (due to the demand /scarcity) a numbers matching steel case rear end please add $2000.00 more. |
Turn Key from $34,500.00!! Painted & Upholstered Cobrette©
| Two-stage urethane painted & striped body matched to the exact colors you select. |
| Hand Stitched Leather Interior to meet your personal specifications. |
| Wilton Carpet imported from Germany used in the finest European automobiles. |
| 18 Gallon polished Aluminum fuel tank heli-arced by a certified welders. |
| Seven white face Auto Meter Gauges. |
| Small block Chevrolet Engine producing 340-350 hp. |
| Turbo-hydromatic three speed automatic transmission. |
| Hardtop included for a limited time. |
| Optional Big Block Chevy 450 HP NEW GM crate engine $5000.00 (installed). |
| Optional NEW: Muncie four-speed transmission, linkage ,shifter and pedal assembly $2500(Installed). |
(Turn Key Cobrette© pictured below)
F.A.Q. - Most Frequently Asked Question Click here
What is hardware ?
Hardware
: already included in Phase 2, 3 & 4Headlights with Chrome plated trim rings and headlight buckets.
Taillights.
La Mans aluminum flip-top gas cap.
Chrome plated windshield frame & glass.
Chrome plated license plate lamp.
Two aluminum side louvers.
Chrome plated rear view mirror. \
Chrome plated trunk handle.
Two chrome plated hood handles.
Two front turn indicator lamps.
What do I still need for phases 1-4?
Here is the
projected build up costs Outlined below:|
| 1968-82 Vette good used small block w/4 speed $ 2,000.00 |
|
| Cobrette Phase 2 body kit $ 6,250.00 |
|
| Wind-wings & Sun Visors $ 250.00 |
|
| Auto Meter Gauges (8) $ 550.00 |
|
| Wiper Assembly $ 325.00 |
|
| Hood Hinge Kit $ 195.00 |
|
| Seats from Honda $ 150.00 |
|
| Leather Interior $ 900.00 |
|
| Assembly Manual $50.50 (free with kit purchase) |
|
| 15" Centerline Wheels $ 1,275.00 |
|
| 15" tires 275/50/15 235/60/15 $ 800.00 |
|
| Chrome single roll bar $ 350.00 |
|
| Chrome Hooker header for Vette bolt on $1,500.00 |
|
| Prime Bodywork & Paint w/ stripes $ 2,500.00 |
|
| Aluminum Pulley Set $ 300.00 |
|
| Powder coasting $ 350.00 |
|
| Cad plating bolts $75.00 |
|
| Frame restoration (All new rotors, calipers, |
|
| Bearings, Joints, Blasting Powder coating $2,000.00 |
|
| EZ Wiring harness (Shrink tubing , solder etc.) $ 350.00 |
|
| Misc. rivets $ 50.00 |
|
| Replacement Direction Flasher $ 10.00 |
|
| Radiator, Fan & Switch, Misc. brackets $ 350.00 |
|
| Overflow tank spun aluminum $ 125.00 |
|
| In Line Fill Hose w/ cap Kit $ 45.00 |
|
| Heavy Duty Fan Relay $ 20.00 |
|
| 180 Degree Thermostat $ 7.00 |
|
| 18 gallon fuel cell ,Sending unit, Braided line $ 400.00 |
|
| Gates Drive Belts $ 100.00 |
|
| Gates green stripe Hoses $ 85.00 |
|
| Throttle Cable (OEM replacement) $ 35.00 |
|
| New OEM Vette Engine mounts $ 60.00 |
|
| MSD Ignition Controller $ 150.00 |
|
| Ignition wires & Spark Plugs $ 125.00 |
|
| Distributor Cap HEI $ 17.75 |
|
| Penske Shocks (Front and rear) $ 150.00 |
|
| Carter AFB Carb. $ 300.00 |
|
| Ultima Battery & Heavy gauge cables $ 150.00 |
|
| Clutch / Pressure Plate / Throw-out Bearing Set $ 250.00 |
|
| 4 Speed (From Vette) over-hauled $ 400.00 |
|
| Shifter and linkage (Use Vette) $ 00.00 |
|
| Rebuilt engine (350hp) using 68-82 vette as core $ 1,200.00 |
|
| Intake Edelbrock $ 175.00 |
|
| Water Pump (High Volume Modified impeller) $ 100.00 |
|
| Alternator 100 amp $ 100.00 |
|
| Starter Hi Torque Tilton $ 330.00 |
|
| Handbrake Assembly (Use Vette) $ 00.00 |
|
| Gas Pedal (Use Vette) $ 00.00 |
|
| Steering Column Tilt Telescopic (Use Vette) $ 00.00 |
|
| Hydraulic pedal assy & Slave cylinders $ 500.00 |
|
| Misc. Brake / Fuel Lines / Braided lines $ 200.00 |
|
| Chrome Jack (4) Bumpers $ 600.00 |
|
| Chrome Side Mirrors (2) $ 90.00 |
|
| Running Total $ 26,089.75 |
|
| Vette parts sold (Body Panels, Int. etc.) Minus - ($2,000.00) |
|
|
Final Total $ 24,089.75 |
|
| Convertible Top $ 2,500 OPTIONAL |
|
| Hard Top w/ hardware $ 1,500 OPTIONAL |
|
| Sliding side windows $ 750 OPTIONAL |
Links to Vette related Parts
Brad's Corvettes - used Corvette parts
http://www.flinet.com/~bradscorvettes/
Clarement Corvette UK
http://www.corvette.co.uk/
Corvette Salvage
http://www.corvettesalvage.com/
Dave's GM Auto Wrecking - in Placentia, CA
http://www.nos.net/davato/corvette.htm
Davies Automotive
http://corvetteparts.com/
Dino's Corvette Parts
http://www.dinosvetteparts.com/
GM Sports Salvage - in San Jose, CA
http://www.gmsports.com/
High Performance Salvage, Inc.
http://www.hpsalvage.com/
J&D Corvette
http://www.geocities.com/~jdcorvette/
Lingenfelter Performance Engineering
http://www.lingenfelter.com/
*****Vette Brakes & Products ( most popular on our kits to date!!)
http://wwww.vettebrakes.com/
*** Zip Corvette Parts ( our top choice in parts suppliers ! )
http://www.zip-corvette.com/
Click here to MORE PICTURES!!!!!!
For additional information or pricing, E-mail ©